Blog

Archive for the ‘engineering’ category: Page 136

Jun 5, 2020

Self-assembling, biomimetic composites possess unusual electrical properties

Posted by in categories: engineering, nanotechnology

Sometimes, breaking rules is not a bad thing. Especially when the rules are apparent laws of nature that apply in bulk material, but other forces appear in the nanoscale.

“Nature knows how to go from the small, to larger scales,” said Melik Demirel, professor of engineering science and mechanics and holder of the Lloyd and Dorothy Foehr Huck Chair in Biomimetic Materials. “Engineers have used mixing rules to enhance properties, but have been limited to a single scale. We’ve never gone down to the next level of hierarchical engineering. The key challenge is that there are apparent forces at different scales from molecules to bulk.”

Composites, by definition, are composed of more than one component. Mixture rules say that, while the ratios of one component to another can vary, there is a limit on the physical properties of the composite. According to Demirel, his team has broken that limit, at least on the nanoscale.

Jun 4, 2020

Superlubricity and nanotechnology

Posted by in categories: biotech/medical, engineering, nanotechnology

Achieving near-zero friction in commercial and industrial applications will be game-changing from tiny microelectromechanical systems that will never wear out, to oil-free bearings in industrial equipment, to much more efficient engines and giant wind turbines scavenging energy even in low wind conditions. Superlubricity offers promising solutions to overcome lubrication challenges in various areas of nanotechnology including micro/nano-electromechanical systems (MEMS/NEMS), water transport control, biomedical engineering, atomic force microscopy (AFM), aerospace and wind energy applications, as well as other electronic devices. It is one of the most promising properties of functional nanomaterials for energy saving applications.

Jun 2, 2020

Why this trick should be IMPOSSIBLE ft. Rodney Mullen — Skateboarding Science

Posted by in categories: engineering, physics, science

Skateboarding legend Rodney Mullen teams up with Physics Girl to explain the unusual physics behind skateboard tricks. Filmed with a phantom high speed camera at 1000fps, see Mullen’s tricks like never before.

If you liked this video check out these:
How SMOOTHNESS of a SOCCER BALL affects curve!

Crazy tic tac bounce!?

Continue reading “Why this trick should be IMPOSSIBLE ft. Rodney Mullen — Skateboarding Science” »

Jun 2, 2020

Novel Error Correction Code Opens a New Approach to Universal Quantum Computing

Posted by in categories: computing, engineering, government, quantum physics

Government agencies and universities around the world—not to mention tech giants like IBM and Google—are vying to be the first to answer a trillion-dollar quantum question : How can quantum computers reach their vast potential when they are still unable to consistently produce results that are reliable and free of errors?

Every aspect of these exotic machines—including their fragility and engineering complexity; their preposterously sterile, low-temperature operating environment; complicated mathematics; and their notoriously shy quantum bits (qubits) that flip if an operator so much as winks at them—are all potential sources of errors. It says much for the ingenuity of scientists and engineers that they have found ways to detect and correct these errors and have quantum computers working to the extent that they do: at least long enough to produce limited results before errors accumulate and quantum decoherence of the qubits kicks in.

Jun 2, 2020

Researchers develop viable sodium battery

Posted by in categories: energy, engineering

Washington State University (WSU) and Pacific Northwest National Laboratory (PNNL) researchers have created a sodium-ion battery that holds as much energy and works as well as some commercial lithium-ion battery chemistries, making for a potentially viable battery technology out of abundant and cheap materials.

The team reports one of the best results to date for a sodium-ion . It is able to deliver a capacity similar to some and to recharge successfully, keeping more than 80 percent of its charge after 1,000 cycles. The research, led by Yuehe Lin, professor in WSU’s School of Mechanical and Materials Engineering, and Xiaolin Li, a senior research scientist at PNNL is published in the journal, ACS Energy Letters.

“This is a major development for ,” said Dr. Imre Gyuk, director of Energy Storage for the Department of Energy’s Office of Electricity who supported this work at PNNL. “There is great interest around the potential for replacing Li-ion batteries with Na-ion in many applications.”

Jun 1, 2020

NASA brings Voyager 2 fully back online, 11.5 billion miles from Earth

Posted by in category: engineering

In an incredible feat of remote engineering, NASA has fixed one of the most intrepid explorers in human history.


Thanks to some (very) remote engineering work by NASA, the intrepid explorer’s science mission is back on.

Jun 1, 2020

Predictive biology: modelling, understanding and harnessing microbial complexity

Posted by in categories: biological, engineering, physics

Predictive biology is the next great chapter in synthetic and systems biology, particularly for microorganisms. Tasks that once seemed infeasible are increasingly being realized such as designing and implementing intricate synthetic gene circuits that perform complex sensing and actuation functions, and assembling multi-species bacterial communities with specific, predefined compositions. These achievements have been made possible by the integration of diverse expertise across biology, physics and engineering, resulting in an emerging, quantitative understanding of biological design. As ever-expanding multi-omic data sets become available, their potential utility in transforming theory into practice remains firmly rooted in the underlying quantitative principles that govern biological systems. In this Review, we discuss key areas of predictive biology that are of growing interest to microbiology, the challenges associated with the innate complexity of microorganisms and the value of quantitative methods in making microbiology more predictable.

May 30, 2020

We publish scientific and engineering peer-reviewed academic journals and book series | Scientific.Net

Posted by in categories: engineering, materials

Research of landmine detection using terahertz technology.


Scientific. Net, the trademark of Trans Tech Publications Ltd., is one of the largest web resources, publishes peer-reviewed academic journals and book series in field of materials science and engineering.

May 30, 2020

Smart metamaterials that sense and reprogram themselves

Posted by in categories: engineering, materials

Materials scientists aim to engineer intelligence into the fabric of materials or metamaterials for programmable functions. Engineering efforts can vary from passive to active forms to develop programmable metasurfaces using dynamic and arbitrary electromagnetic (EM) wavefields. Such metasurfaces, however, require manual control to switch between functions. In a new study now published on Light: Science & Applications, Qian Ma and an interdisciplinary research team in the State Key Laboratory, Cyberspace Science and Technology, and the Department of Electronics in China engineered a smart metasurface for self-adaptive programmability.

May 29, 2020

Making matter out of light: high-power laser simulations point the way

Posted by in categories: engineering, military, particle physics

A few minutes into the life of the universe, colliding emissions of light energy created the first particles of matter and antimatter. We are familiar with the reverse process—matter generating energy—in everything from a campfire to an atomic bomb, but it has been difficult to recreate that critical transformation of light into matter.

Now, a new set of simulations by a research team led by UC San Diego’s Alexey Arefiev point the way toward making matter from light. The process starts by aiming a high-power laser at a target to generate a magnetic field as strong as that of a neutron star. This field generates that collide to produce—for the very briefest instant—pairs of matter and antimatter particles.

The study, published May 11 in Physical Review Applied offers a sort of recipe that experimentalists at the Extreme Light Infrastructure (ELI) high-power laser facilities in Eastern Europe could follow to produce real results in one to two years, said Arefiev, an associate professor of mechanical and aerospace engineering.