Comments on: Engineering student helps federal experts solve a messy 3D printing problem https://spanish.lifeboat.com/blog/2021/05/engineering-student-helps-federal-experts-solve-a-messy-3d-printing-problem Safeguarding Humanity Sun, 16 May 2021 06:40:32 +0000 hourly 1 https://wordpress.org/?v=6.6.1 By: Printable Press https://spanish.lifeboat.com/blog/2021/05/engineering-student-helps-federal-experts-solve-a-messy-3d-printing-problem#comment-431881 Sun, 16 May 2021 06:40:32 +0000 https://lifeboat.com/blog/2021/05/engineering-student-helps-federal-experts-solve-a-messy-3d-printing-problem#comment-431881 If the problem is lack of adhesion, it is usually due to low of temperature. Most filaments have a temperature range in which they can be printed.

Within this range, lower values will give us a better aesthetic appearance, since the deposition will be “cleaner”. Conversely, higher values will give us better layer adhesion. Printing materials such as ABS at less than the proper temperature often leads to cracking when trying to bond two layers without applying enough heat.

]]>